Product ID:AQUATA-POXY PART A
MSDS Date:09/01/1989
FSC:8040
NIIN:00N014975
Kit Part:Y
MSDS Number: BKNJV

AMERICAN CHEMICAL CORP

1495 ZEPHYR AVE
HAYWARD, CA 94544
US

Emergency Phone: 415-475-0888

Info Phone: 415-475-0888

Cage: 5T256

AMERICAN CHEMICAL CORP

HAYWARD, CA 94544 US

Telephone: 415-475-0888

Cage: 5T256

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 8-11%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

TALC (CONTAINING NO ASBESTOS)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 0-16%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9192

SILICA

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 30-40%

EPOXY RESIN

CAS: 25085-99-3

EPOXY RESIN

CAS: 26142-30-3

OF IMPURITIES (INCLUDING A KNOWN ANIMAL SKIN

RTECS: 9999999ZZ

EPOXY RESIN THAT IS REPRESENTATIVE OF CURRENT MFR

RTECS: 9999999ZZ

HUMANS. RESULTS OF MUTAGENICITY TESTS IN ANIMALS

RTECS: 9999999ZZ

SOME INVITRO ("TEST TUBE") MUTAGENICITY TESTS AND

RTECS: 9999999ZZ

LD50 LC50 Mixture:LD50:(ORAL,RAT) >4000 MG/KG.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:EYE: MAY CAUSE SLIGHT TRANSIENT
(TEMPORARY) EYE IRRIT. CORNEAL INJURY IS UNLIKELY. SKIN: MAY CAUSE
ALLERGIC SKIN RXN IN SUSCEPTIBLE INDIVIDUALS. PRLNG EXPOS NOT
LIKELY TO CAUSE SIGNIFICANT SKIN IRRIT. RPTD EXPOS MAY CAUSE SKIN
IRRIT. SKIN ABSORP: A SINGLE PRLNG EXPOS IS NOT LIKELY TO RESULT IN
(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:HLTH HAZ: MATL BEING ABSORBED THRU SKIN IN
HARMFUL AMTS. INGEST: SINGLE DOSE ORAL TOXICITY IS LOW. NO HAZ
ANTICIPATED FROM INGEST INCIDENTAL TO INDUSTRIAL EXPOS. INHAL: VAPS
ARE UNLIKELY DUE TO PHYSIC AL PROPERTIES. SYSTEMIC & OTHER EFTS:
EXCEPT FOR SKIN SENSIT, RPTD EXPOS TO LOW MOLECULAR WEIGHT EPOXY
(SEE SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE: FLUSH WITH LARGE QUANTITIES OF WATER FOR AT LEAST 15
MINUTES. CONSULT MD. SKIN: WASH OFF IN FLOWING WATER OR SHOWER.
INHAL: REMOVE TO FRESH AIR IF EFFECTS OCCUR. CONSULT MD. INGEST: NO
ADVERSE EF FECTS ANTICIPATED BY THIS ROUTE OF EXPOSURE INCIDENTAL
TO PROPER INDUSTRIAL HANDLING.

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:FOAM, CO*2 OR DRY CHEMICAL.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
H*2O MAY BE HELPFUL IN KEEPING ADJACENT CNTNRS COOL. AVOID SPREAD
BURNING LIQ W/H*2O USED FOR COOLING PURPOSES.
Unusual Fire/Explosion Hazard:KEEP WORK AREAS FREE OF HOT METAL
SURFACES AND OTHER SOURCES OF IGNITION.

Spill Release Procedures:KEEP SOURCES OF IGNITION AND HOT METAL
SURFACES ISOLATED FROM THE SPILL. MATERIAL MAY FLOW SLOWLY. SCRAPE
INTO CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. AVOID PROLONGED OR REPEATED CONTACT WITH SKIN. DO NOT HANDLE
OR STORE NEAR FLAME, HEAT (SEE OTHER PREC)
Other Precautions:HNDLG/STOR PREC: OR STRONG OXIDANTS. DO NOT STORE IN
DIRECT SUNLIGHT. STORE IN COOL DRY AREA. AVOID PROLONGED STORAGE
ABOVE 38C (100F).

Respiratory Protection:RESPIRATORY PROTECTION SHOULD NOT BE NEEDED. IF
RESPIRATORY IRRITATION IS EXPECTED, USE A NIOSH/MSHA APPROVED
AIR-PURIFYING RESPIRATOR.
Ventilation:GEN MECH VENT IS SUFFICIENT FOR MOST CONDITIONS. LOCAL
EXHAUST VENTILATION MAY BE NECESSARY FOR SOME OPERATIONS.
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR CLEAN, LONG-SLEEVED, BODY-COVERING
CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP: RESINS OF THIS TYPE ARE NOT ANTICIPATED TO CAUSE ANY
SIGNIFICANT ADVERSE EFTS. A POORLY CHARACTERIZED SAMPLE OF LOW
MOLECULAR WEIGHT EPOXY RESIN OF THIS TYPE (DIGLYCIDYL ETHER OF BISP
HENOL A) HAS BEEN RPTD TO PRODUCE SKIN CANCER IN A HIGHLY SENSITIVE
STRAIN OF MICE. HOWEVER, HIGH LEVELS (SEE ING 6)

HCC:V7
Boiling Pt:B.P. Text:>200F,>93C
Spec Gravity:1.45-1.65
Solubility in Water:NEGLIGIBLE
Appearance and Odor:HEAVY PAINT TO MASTIC CONSISTENCY - FAINT EPOXY
ODOR.
Percent Volatiles by Volume:<1

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND BASES, SELECTED AMINES, OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
OF AIR MAY YIELD CO & CO*2.

Waste Disposal Methods:PLACE IN CLOSED CONTAINERS FOR SOLID WASTE AND
BURN IN APPROVED INCINERATION OR BURY FILLED CONTAINERS IN APPROVED
LANDFILL IN COMPLIANCE WITH ALL LOCAL AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.